Wet Processing Stations

These processing stations incorporate all processing components in one self-contained, easy-to-clean system.

Stainless Steel Wet Processing Stations Recommended for applications using solvents or flammables.

The standard systems include a self-contained wet processing station of the specified size and material, a sliding access shield, and a fluorescent illuminator. A control panel to the right of the process deck provides safe, convenient access to all system controls. Heavy-duty locking casters with 4"-diameter urethane wheels facilitate positioning, and support posts with polypropylene leveling feet provide stable support in the desired location. The application illustrations below represent typical process bath configurations. Baths can be arranged in a single or double row. A single cabinet can house up to 14 separate process baths, rinsers, and other process modules. A raised lip surrounds the work area to prevent floor spills. A full-length plenum sink located under the work surface contains overflow for easy disposal, and an optional plenum flush quickly empties the plenum through a drain valve. Convenient front-panel valves control operation of nitrogen or auxiliary gas equipment, DI water, exhaust venting, and power. A storage area below the deck holds collection tanks or reserve chemicals. The optional Filter/Blower Module provides a vertical laminar flow of HEPA-filtered air for particle-sensitive applications. Exhaust fumes can be ducted through a 10"-diameter flange located on the top of the wet processing stations.

The Wet Processing Stations accommodate up to eight processing modules (rinsing tanks, etching baths, ultrasonic cleaners, hot plates, etc.). Simply select the locations to meet your requirements or contact us for a custom module.

Manfredi Industries, 705 East Bidwell Street #277, Folsom, CA 95630. Tel: 916-608-0797; Fax: 916-355-0584.