News | May 24, 2022

Silanna Semiconductor's Roll Out Of AnyPort™ Architecture Will Dramatically Simplify Development Of Multi Port Chargers

By choosing AnyPort architecture designers can quickly configure additional ports to new and existing high-efficiency, fast charger designs

San Diego, CA (PRWEB) - Silanna Semiconductor, The Power Density Leader, has announced that it will be making its flexible AnyPort™ architecture for multiport chargers available for a wide variety of silicon- and GaN-based designs supporting power levels beyond 100W.

AnyPort is an innovative new architecture that gives designers the flexibility to complete a charger design for a given power level prior to specifying and configuring the specific number and type of output ports. By allowing a single base charger design to be deployed across a variety of end products with different output configurations, AnyPort can significantly speed the development and reduce the complexity of fast chargers and adapters with multiple Type-C and/or Type-A [four] output ports.

AnyPort brings together Silanna’s CO2 Smart Power™ families of advanced ACF controllers and high-frequency DC/DC converters to deliver high-power-density, ultra-efficient, multi-port charger solutions for USB-PD applications between 30W and 150W. The ability to specify port count and type at the end of the design process is made possible by combining a fixed-output front-end AC/DC stage powered by Silanna Semicondcutor’s ACF controller and multiple downstream DC/DC stages independently regulating any number of Type-C and Type-A ports.

AnyPort was first deployed in Silanna Semiconductor’s RD-5 all-silicon reference design, a production-ready solution that provides everything an engineer needs to rapidly prototype and test a fully functional 65W 2C charger. As well as incorporating AnyPort into future silicon- and GaN-based reference designs, the company is now planning to make the AnyPort architecture available to all customers of its advanced AC/DC and DC/DC technologies.

“By allowing designers to start work on a charger design before deciding on the number and type of outputs AnyPort represents a significant step forward in terms of the design flexibility it offers OEM and aftermarket charger and adapter manufacturers,” says Hubie Noto, Silanna Semiconductor’s director of product marketing. “Basing a design around AnyPort architecture speeds development, minimizes the BoM required across multiple charger models and allows companies to launch and modify high-efficiency, high-power-density products in the shortest possible timescales.”

Silanna’s ultra-high-efficiency ACF controllers integrate into an ultra-compact 16-pin SOIC package an adaptive digital PWM controller, ultra-high-voltage (UHV) active clamp FET, active clamp gate driver and startup regulator and provide the simplicity of a simple flyback controller with all the benefits of an ACF design. This includes recycling the leakage inductance energy of the flyback transformer and limiting the primary FET drain voltage spike during turn-off events. Employing Silanna Semiconductor’s OptiModeTM digital control architecture, these controllers adjust the device’s mode of operation on a cycle-by-cycle basis to maintain high efficiency, low EMI, fast dynamic load regulation, and other key power supply parameters in response to varying line voltage and load conditions.

Supplied in miniature QFN packages, Silanna’s DC-DC portfolio comprises high-voltage, high-efficiency, wide-input integrated buck converters that offer selectable switching frequencies and have unique features to optimize performance in USB port power supply applications. Extremely low operating power dissipation enables very low no-load power - an important specification for regulatory certification - while a momentary internal feedback path allows for clean and well-controlled start-up operation until external USB-PD controllers can bias themselves and take over control of the output voltage. 

AnyPort Key Features and Benefits

  • Fully configurable - any number and type of output ports
  • Design is governed by maximum output power only
  • Significantly improves the development speed and reduces the complexity of multi-port fast charger and adapter designs
  • Enabled by Silanna Semiconductor’s end-to-end AC/DC and DC/DC line of products
  • CO2 Smart Power

Availability
Information is available at https://powerdensity.com/reference-design/ or by contacting sales@silanna.com.

About Silanna Semiconductor: The Power Density Leader. Delivering on the ultimate Power Management challenge of best-in-class power density and efficiency performance that delights customers with unprecedented BoM savings. Silanna Semiconductor’s AC/DC and DC/DC power converter ICs are driving key innovations in Travel Adapters, Laptop Adapters, Appliance Power, Smart Metering, Computing, Lighting, Industrial Power, and Display Power utilizing the latest digital and analog control and device technologies. In addition to our global engineering sales force, customers are supported by regional design centers and online tools. ‘Power Density Hero’ is an online design tool where customers input their power needs and instantly receive a complete design, schematic, and ‘Bill of Materials’ (BOM). The Asian Center of Excellence (ACE) has a dedicated team of power system engineers to support our customers in their application specific design needs.

Silanna Semiconductor, with its family of CO2 Smart Power™ ICs, offers technologies that will benefit the planet and the people on it by delivering best-in-class power density and efficiency.

Silanna Semiconductor, headquartered in San Diego, CA, is a privately-held semiconductor company, and has global facilities supporting customers with design centers and offices in North America, Europe, Asia, and Australia.

Source: PRWeb

View original release here: Model.Doc.OriginalUrl