PTS-100 & PLD-100
Accuracy in probing is what the accuprobe name is all about. The PTS-100 is an excellent example for ease of use, rugged reliability, and high level accuracy in a compact independent package. Since the PTS-100 is an independent instrument someone can be planarizing a probe card while someone else is building or repairing a card on the PCAM.
Measurements are made with a digital linear gauge. The PTS-100 digital linear gauge provides a bright, easy to read display in either inches or millimeters. The gauge has a zero reset and has a data port for an external PC connection.
PLD-100 Planarization Light Display
The PLD-100 Planarization display provides a convenient display to monitor probe contact when measuring or adjusting the probe planarization of a probe card assembly. The display significantly enhances the planarization maintenance aspect of probe card care by allowing the user to visually verify the simultaneous contact of all probes to the reference plane and quickly identify high or low probes.
The PLD-100 also includes a unique variable beep-rate audible continuity checker. This troubleshooter can be used to detect shorts and opens and to identify conductive contamination that could result in leakage and corrupt test results.
The PLD-100 has a large display area that can display 144 probes in a radial array. Each PLD is supplied with a choice of one display overlay and a matching probe card interface cable that corresponds to the probe card edge connector. Other overlays and interface cables can be ordered separately.
Accuprobe, Inc, 1 Harrison Avenue, P.O. Box 1044, Salem, MA 10970. Tel: 978-745-7878; Fax: 978-745-7922.