Product/Service

Biological Safety Cabinets: Class I And Class II

NuAire logo

NuAire Biological Safety Cabinets provide personnel, product and/or environmental protection when looking to obtain optimum control over product quality while reducing the potential for exposure. Ergonomic Biosafety Cabinet design improves laboratory safety practices and process accuracy.
 

Class I Biosafety Cabinets

Labgard NU-813 
The Labgard NU-813 is a class I biosafety cabinet that provides personnel protection for handling aerosols and particulate matter of low risk assessment. The NU-813 provides personnel protection from solvents such as those employed in cytology.

Class II, Type A2 Biological Safety Cabinets

LabGard® ES NU-540
Model NU-540 is an effective primary engineering control in obtaining the optimum product quality while reducing the potential for exposure of both product and personnel to airborne biological or particulate chemical agents in low to moderate risk‐hazard research and drug preparation.

LabGard® ES AIR NU-543
LabGard® model NU-543 is available in an 8, 10, or 12 inches (203, 254, or 305 mm) access opening. NU-543 is an effective primary engineering control in obtaining the optimum product quality while reducing the potential for exposure of both product and personnel to airborne biological or particulate chemical agents in low to moderate risk-hazard research and drug preparation or product operations by monitoring and controlling real-time airflow to maintain accurate laminar airflow and a dynamic air barrier.

LabGard® ES AIR Limited NU-545
The LabGard® ES (Energy Saver) AIR Limited Model NU-545 Biological Safety Cabinet (BSC) is a primary engineering control in obtaining the optimum product quality while reducing the potential for exposure of both product and personnel to airborne biological or particulate chemical agents in low to moderate risk-hazard research and drug preparation or product operations, as prescribed by the Center for Disease Control (CDC) Atlanta, Georgia..

LabGard® ES CYTO NU-581
The LabGard CYTO NU-581 Biosafety Cabinet offers a safer environment for applications involving cytotoxic API powders through a three-tiered HEPA filtration system.

Class II, Type B1 Biosafety Cabinet

Labgard 427
The Labgard 427 offers significantly reduced life-cycle costs with a number of design innovations that make the Class II Type B1 Laminar Flow Biological Safety Cabinet a viable choice for laboratory professionals.

Class II, Type B2 Biosafety Cabinets

LabGard® ES TE NU-560 Class II, Type B2 Biosafety Cabinet
Model NU-540 is an effective primary engineering control in obtaining the optimum product quality while reducing the potential for exposure of both product and personnel to airborne biological or particulate chemical agents in low to moderate risk‐hazard research and drug preparation.

LabGard® ES TE NU-565 Class II, Type B2 Biosafety Fume Hood
The LabGard ES (Energy Saver) TE (Total Exhaust) model NU-565 is an NSF/ANSI 49 Class II, Type B2 Biosafety Fume Hood designed to meet ASHRAE 110 classified to UL 1805 may be used for work with flammable or volatile chemicals and radionuclides required if permitted by chemical risk assessment.