Asynchronous Serial Controller
Source: Innovasic, Inc.
The IA82510 is an asynchronous serial controller that provides a CPU interface to one transmit and one receive channel
Innovasic, Inc. is an asynchronous serial controller that provides a CPU interface to one transmit and one receive channel. It is Form, Fit, and Function compatible with the Intel 82510. Configuration registers are used to control the serial channel, interrupts, and modes of operation. The CPU controls this device via address and data lines with read/write control. The CPU also uses this interface to read and write data to receive and transmit data through the serial channel. FIFOs and various serial modes can be used to help off-load the CPU from transmitting and receiving data. An interrupt line provides an indication to the CPU that the device requires servicing. The device can be configured for 8250A/16450 compatibility. Form, Fit, and Function Compatible with the Intel 82510
Packaging options available: 28 Pin Plastic or Ceramic DIP, 28 Pin Plastic
Leaded Chip Carrier, 28 Pin Ceramic Leadless Chip Carrier
Asynchronous Serial Channel Operation
Separate Transmit and Receive FIFOs with Programmable Threshold
Programmable Baud Rate Generators up to 288K Baud
Special Protocol Features
Control Character Recognition
Auto Echo and Loopback Modes
9-Bit Protocol Support
5 to 9 Bit Character Format
Features:
<%=company%>, 3737 Princeton NE, Suite 130, Albuquerque, NM 87107, Phone: (505) 883-5263 FAX (505) 883-5477