Air Showers
- Completely self-contained, pre-wired, fully equipped Air Shower/Tunnel systems help solve decontamination problems
- Modular design lets you order a system to suit your cleanroom
- HEPA filter/blower modules (rated 99.97% efficient @ 0.3 micron particles) wash personnel with Class 100 air to dislodge and remove particles
- Solid-state microprocessor panel provides programmable control over access door operation
- Interlocking doors minimize contamination, release automatically in the event of power failure
- Fluorescent lighting is housed in the ceiling for minimal turbulence
- Available in white epoxy-finished CR steel, stainless steel, or plastic laminate to meet various cleanroom requirements
- Variety of sizes and door configurations
- Economical to operate, easy to maintain
- System options include HEPA-filtered ceiling, ionized grid, and safety glazing
Each unit is a fully equipped, protected passageway that allows large numbers of personnel to pass into controlled areas without sacrificing convenience or cleanliness.
Air Showers supply concentrated Class 100, clean air flows to lift off contamination while an individual stands in, or walks through, a specially constructed air chamber. Whenever an automatic floor switch inside the unit is activated, pressurized air streams from adjustable nozzles at a velocity between 6,000 and 8,000 feet per minute, a force that ensures efficient scrubbing action necessary to remove particulate matter. (Air showers in units without floors are activated by motion sensors.)
Nozzles are arranged on walls and ceilings in a uniform pattern to ensure effective distribution of filtered air; the lowest nozzle is positioned 19" off the floor. The closed-loop circulation design directs contaminated air downward through grills and hollow walls of the Air Shower and back to the filter, which removes 99.97% of all particles as small as 0.3 microns.
Manfredi Industries, 705 East Bidwell Street #277, Folsom, CA 95630. Tel: 916-608-0797; Fax: 916-355-0584.