News | July 5, 2022

indie Semiconductor Launches Automotive Industry's Most Integrated USB-PD Programmable Controller

ALISO VIEJO, CALIF.--(BUSINESS WIRE)--

indie Semiconductor (Nasdaq: INDI), an Autotech solutions innovator, has launched a dual-channel USB Power Delivery (PD) IC that reduces component count, simplifies designs and enhances reliability of in-cabin vehicle charging systems for portable devices. Combining power conversion and control and supporting any configuration of USB Type A and Type C ports, the iND87300 is the automotive industry’s most integrated USB-PD firmware programmable controller.

OEMs are focused on enhancing the in-cabin experience allowing drivers and passengers to safely connect and fast charge personal devices inside the vehicle. Automotive USB-based power delivery is rapidly evolving to support higher power charging requirements of products such as tablets and laptops with an increasing number of ports throughout the cabin. The iND87300 has been designed to meet these challenging system requirements through an ultra-small form factor with minimal components. Further, the iND87300 supports field upgradability to future proof device interoperability and user experience utilizing indie’s firmware tools and global support.

“At indie, we are creating innovative technologies to meet the increasing demand for personalized in-cabin user experiences,” said Michael Wittmann, vice president of product marketing at indie Semiconductor. “Drivers and passengers expect to be able to charge phones, tablets, laptops and other battery-powered devices conveniently and safely. Our highly innovative solution allows OEMs to meet current and future USB charging requirements with fewer components and reduced design complexity. We are excited to be working with multiple Tier 1 and OEM customers to bring iND87300-based solutions to high volume production in early 2023.”

The controller brings together, in a single, ultra-compact 8.8mm x 10mm QFN package, a buck-boost converter, Arm® Cortex® M0 core processor, 64kB Flash and 16kB SRAM memory, a 12-bit housekeeping Analog to Digital Converter (ADC) and a variety of system interfaces including UART, I2C and LIN. A USB-PD PHY and firmware stack supports USB-C channel configuration and PD port control, while the on-board 32-bit MCU allows vendor-specific configurations as well as field upgrades and over-the-air (OTA) updates that ensure future compatibility with new and emerging charging profiles and USB-PD protocols. Enabling system efficiency above 95%, this device can deliver up to 60W of output power per channel, a programmable output voltage between 3.3V and 21V and supports maximum currents up to 5A. Dedicated LED illumination drivers and general purpose I/O round up the feature list.

The iND87300 is sampling now, qualified for AEC-Q100 Grade 1 and is fully compliant with USB BC1.2 and USB PD2.0/3.0 standards as well as a number of proprietary charging modes. It supports both charging downstream port (CDP) and dedicated charging port (DCP) in addition to Apple and Samsung charging schemes. Direct connection to the vehicle power supply is made possible by the ability to withstand a 40V load dump from the vehicle battery and 24V tolerant pins that protect against shorts to VBAT and GND.

#indieSemi_Product

About indie

indie is empowering the Autotech revolution with next-generation automotive semiconductors and software platforms. We focus on edge sensors spanning multiple modalities, including LiDAR, radar, ultrasound and vision for Advanced Driver Assistance Systems (ADAS), user experience and electrification applications. These technologies represent the core underpinnings of both electric and autonomous vehicles while our advanced user interfaces enabled by our mixed-signal SoCs transform the in-cabin experience to mirror and seamlessly connect to the mobile platforms we rely on every day. We are an approved vendor to Tier 1 partners and our solutions can be found in marquee automotive OEMs around the world. Headquartered in Aliso Viejo, CA, indie has design centers and sales offices in Austin, TX; Boston, MA; Detroit, MI; San Francisco and San Jose, CA; Budapest, Hungary; Dresden and Munich, Germany; Edinburgh, Scotland; Haifa, Israel; Quebec City, Canada; Tokyo, Japan and several locations throughout China.

Safe Harbor Statement

This communication contains “forward-looking statements” (including within the meaning of Section 21E of the United States Securities Exchange Act of 1934, as amended, and Section 27A of the Securities Act of 1933, as amended). Such statements include, but are not limited to, statements regarding our future business and financial performance and prospects, and other statements identified by words such as “will likely result,” “expect,” “anticipate,” “estimate,” “believe,” “intend,” “plan,” “project,” “outlook,” “should,” “could,” “may” or words of similar meaning. Such forward-looking statements are based upon the current beliefs and expectations of our management and are inherently subject to significant business, economic and competitive uncertainties and contingencies, many of which are difficult to predict and generally beyond our control. Actual results and the timing of events may differ materially from the results included in such forward-looking statements. In addition to the factors previously disclosed in our Annual Report on Form 10-K for the fiscal year ended December 31, 2021 filed with the SEC on April 11, 2022 and in our other public reports filed with the SEC (including those identified under “Risk Factors” therein), the following factors, among others, could cause actual results and the timing of events to differ materially from the anticipated results or other expectations expressed in the forward-looking statements: the impact of the COVID-19 pandemic; the impact of Russia’s invasion of Ukraine; our reliance on contract manufacturing and outsourced supply chain and the availability of semiconductors and manufacturing capacity; competitive products and pricing pressures; our ability to win competitive bid selection processes and achieve additional design wins; the impact of any acquisitions we may make, including our ability to successfully integrate acquired businesses and risks that the anticipated benefits of any acquisitions may not be fully realized or take longer to realize than expected; our ability to develop, market and gain acceptance for new and enhanced products and expand into new technologies and markets; trade restrictions and trade tensions; our ability to build, staff and integrate new design, testing, sales and marketing facilities throughout the world; and political and economic instability in our target markets. All forward looking statements in this press release are expressly qualified in their entirety by the foregoing cautionary statements.

Investors are cautioned not to place undue reliance on the forward-looking statements in this press release, which information set forth herein speaks only as of the date hereof. We do not undertake, and we expressly disclaim, any intention or obligation to update any forward-looking statements made in this announcement or in our other public filings, whether as a result of new information, future events or otherwise, except as required by law.


Copyright Business Wire 2022